How to start an electric start motorcycle with dead battery?

To start an electric start Motorcycle with a dead battery, you will need to jump-start it using another vehicle or a jump-starting device. Here are the steps to follow: 1. Locate the battery of your Motorcycle. It is typically located under the seat or within a compartment on the bike. 2. Connect the jumper cables to the positive and negative terminals of the Motorcycle battery. The positive terminal is usually marked with a "+" symbol. 3. Connect the other ends of the jumper cables to the corresponding terminals of the working battery or jump-starting device. Make sure to connect the positive terminal to positive and negative to negative. 4. Once connected, start the engine of the vehicle with the working battery or turn on the jump-starting device. 5. After a few minutes, try starting your Motorcycle by turning the key and pressing the electric start button. 6. If the Motorcycle starts, let it run for a few minutes to recharge the battery. If it doesn't start, wait a few more minutes and try again. 7. Once your Motorcycle is running, keep it running for a while to ensure that the battery gets charged sufficiently. Remember, jump-starting a Motorcycle with a dead battery is a temporary solution. It is important to have the battery properly checked and replaced if needed to avoid future issues.