How to remove electric start motorcycle?

To remove the electric start system from a Motorcycle, you will need to follow these steps: 1. Gather the necessary tools and equipment: You will need a socket set, wrenches, pliers, and a service manual specific to your Motorcycle model. 2. Disconnect the battery: Start by disconnecting the negative terminal of the battery to prevent any electrical accidents. 3. Locate the electric start system: The electric start system is typically located near the engine and can be identified by a motor and wiring connected to the starter motor. 4. Disconnect the electrical connections: Using pliers or appropriate tools, disconnect the wiring harness connected to the electric start system. Take note of the wire routing to make reinstallation easier. 5. Remove the starter motor: Use a socket set or wrenches to remove the bolts securing the starter motor to the engine. Carefully remove the motor and set it aside. 6. Remove any remaining components: Some motorcycles may have additional components associated with the electric start system, such as solenoids or relays. Remove these components as necessary using the appropriate tools. 7. Reinstall any removed components: If you plan to reinstall the electric start system in the future, keep the components stored safely. Otherwise, consider consulting a professional to ensure proper removal and disposal. Please note that removing the electric start system may require mechanical expertise and can void your Motorcycle's warranty. If you are unsure or uncomfortable with this process, it is recommended to consult a professional Motorcycle mechanic.