How to program vesc electric skateboard?

To program a VESC (Vedder Electronic Speed Controller) for an electric Skateboard, you will need to follow a few steps: 1. Connect the VESC to your computer using a USB cable. 2. Download and install the VESC Tool software, which is available on the VESC website. 3. Open the VESC Tool software and make sure the correct COM port is selected for the VESC. 4. In the software, you will find various settings that can be adjusted to customize the performance of your electric Skateboard. These settings include motor settings, battery settings, and control Mode settings. 5. Start by configuring the motor settings, such as motor type, motor direction, and motor detection to ensure proper operation. 6. Next, adjust the battery settings to match your specific battery pack. This includes input voltage limits, regenerative braking settings, and battery cut-off voltage. 7. Finally, you can fine-tune the control Mode settings to match your riding style and preferences. This includes adjusting acceleration and braking curves, throttle response, and various other parameters. 8. Once you have made all the desired changes to the settings, click on "Write Configuration" to save the changes to the VESC. It's important to note that programming a VESC can be complex, and it is recommended to have some knowledge of electronics and programming. Additionally, improper programming can lead to performance issues or even damage the VESC. If you're unsure or uncomfortable with the process, it is recommended to consult with a professional or reach out to the VESC manufacturer for assistance.