How to prime an electric fuel pump motorcycle?

To prime an electric fuel pump on a Motorcycle, follow these steps: 1. Consult the Motorcycle's manual: Before attempting to prime the electric fuel pump, refer to the Motorcycle's manual to understand the specific procedure for your bike model. 2. Locate the fuel pump: The electric fuel pump on a Motorcycle is typically located near the fuel tank. It may be hidden under the seat or housed in a separate compartment. 3. Turn on the ignition: Switch on the Motorcycle's ignition to activate the electrical system. This will provide power to the fuel pump. 4. Wait for the pump to prime: Once the ignition is turned on, the electric fuel pump will automatically prime itself. This process usually takes a few seconds, during which the pump will pressurize the fuel system. 5. Check for fuel flow: After the pump has primed, check for fuel flow. You can do this by inspecting the sight glass or listening for a humming sound from the pump. If you see fuel flowing or hear the pump running, it indicates that the priming process is complete. 6. Start the engine: Once you have confirmed that the fuel pump is primed, start the engine using the Motorcycle's standard procedure. The engine should now receive an adequate fuel supply from the electric fuel pump. Remember, it's important to always follow the manufacturer's guidelines and recommendations when priming or performing any maintenance on your Motorcycle's electric fuel pump. If you are unsure about the process or encounter any difficulties, it is advisable to consult a professional mechanic or refer to the Motorcycle's manual for further assistance.