How to install headlight kit on ezgo 36 volt electric golf cart?

Installing a headlight kit on an EZGO 36 Volt electric golf cart is a fairly straightforward process. Here are the steps to follow: 1. Gather the necessary tools and equipment: You will need a headlight kit specifically designed for an EZGO 36 Volt electric golf cart. The kit should include headlights, wiring harness, mounting brackets, and any necessary hardware. Additionally, you will need a wrench set, wire cutters/strippers, electrical tape, and a wire crimping tool. 2. Locate the wiring harness: The wiring harness is typically located under the dashboard or in the front of the cart. Remove any panels or covers necessary to access the wiring harness. 3. Connect the headlight wiring: Begin by locating the headlight wires on the wiring harness. These wires are usually color-coded (black for ground, red for positive). Connect the positive wire from the headlight kit to the positive wire on the wiring harness using a wire connector or crimping tool. Repeat this process for the ground wire. 4. Mount the headlights: Attach the mounting brackets included in the kit to the headlights. The brackets may need to be adjusted to align with the holes on the front of the golf cart. Once aligned, secure the headlights using the provided hardware. 5. Route the wiring: Carefully route the headlight wiring along the frame of the golf cart, securing it with zip ties or clips as needed. Be sure to keep the wiring away from any moving parts or areas that may get hot. 6. Connect to the power source: Locate the 36 Volt power source on the wiring harness. This is typically marked with a "+" or "POS" symbol. Connect the positive wire from the headlight kit to this power source using a wire connector or crimping tool. Repeat this process for the ground wire, connecting it to the "-" or "NEG" symbol on the wiring harness. 7. Test the headlights: Once all the wiring connections are made, turn on the golf cart and test the headlights. Ensure they are functioning properly before securing any loose wiring or reinstalling any panels or covers. Always refer to the specific instructions provided with your headlight kit for the most accurate and detailed installation steps. If you are unsure about any part of the installation process, it is recommended to consult a professional or contact the manufacturer for assistance.