How to get an electric start motorcycle started after a flooded engine?

To get an electric start Motorcycle started after a flooded engine, you can follow these steps: 1. Turn off the fuel supply: Locate the fuel shutoff valve and turn it off to prevent further fuel from entering the engine. 2. Open the throttle fully: By opening the throttle fully, you will allow more air to enter the engine, helping to evaporate excess fuel. 3. Turn off the ignition: Switch off the ignition to prevent the Spark plugs from firing, which could potentially cause more flooding. 4. Wait for a few minutes: Give the excess fuel time to evaporate from the engine. This will also allow the Spark plugs to dry out. 5. Close the throttle: After waiting for a few minutes, close the throttle to its normal position. 6. Turn on the ignition: Switch on the ignition and let the fuel pump prime the system. 7. Attempt to start the engine: Press the electric start button and try to start the Motorcycle. If the engine doesn't start initially, try starting it a few more times. Be patient as it may take a couple of attempts to clear the excess fuel. If these steps do not resolve the issue, it is recommended to consult a professional mechanic for further assistance.