How to electric start a moped?

To electric start a Moped, follow these steps: 1. Make sure the Moped's battery is charged: Check the battery level using a battery tester or by turning the key to the "ON" position and looking for a battery indicator on the instrument panel. 2. Turn the key to the "ON" position: Insert the key into the ignition, turn it clockwise, and make sure all the lights on the instrument panel come on. 3. Prime the fuel system (if needed): Some mopeds may require priming the fuel system before starting. This typically involves turning the key to the "ON" position for a few seconds to allow the fuel pump to pressurize the system. 4. Engage the electric starter: Look for a button or switch labeled "START" or with a lightning bolt symbol. Press or flip the switch to engage the electric starter. 5. Hold the throttle: While pressing the starter button or flipping the switch, twist the throttle slightly to provide a small amount of gas to the engine. 6. Listen for the engine to start: As you engage the electric starter and provide gas through the throttle, listen for the engine to turn over and start. Release the starter button or switch once the engine starts running. 7. Let the engine warm up: Allow the engine to warm up for a minute or two before riding off. This will help ensure smooth operation and optimal performance. Note: The specific process may vary depending on the make and model of your Moped. It's always best to consult your owner's manual for detailed instructions on how to electric start your particular Moped.