How to change brake pads on a 1994 e z go electric golf cart?

Changing the brake pads on a 1994 E-Z-GO electric golf cart can be done with a few simple steps. Here's a step-by-step guide to help you through the process: 1. Safety First: Before starting any work, ensure that the golf cart is turned off and the parking brake is engaged. For added safety, it is recommended to block the wheels to prevent any accidental movement. 2. Locate the Brake Assembly: The brake assembly can usually be found near the wheels of the golf cart. Remove any wheel covers or hubcaps to gain access to the brakes. 3. Remove the Old Brake Pads: Using a wrench or socket set, carefully remove the bolts holding the brake caliper in place. Once the caliper is loose, carefully remove the brake pads from the caliper bracket. 4. Install the New Brake Pads: Take the new brake pads and align them with the caliper bracket, making sure they fit securely. Slide the caliper piston back into place, ensuring that it is properly aligned with the pads. 5. Tighten the Caliper Bolts: Once the new brake pads are in position, tighten the caliper bolts securely to hold the assembly in place. Be sure not to over-tighten to avoid damaging the brake system. 6. Test the Brakes: Double-check that the brake pads are securely installed and then remove any blocks placed on the wheels. Turn on the golf cart and take it for a test drive to ensure the brakes are working properly. It is always recommended to consult the manufacturer's manual or seek professional assistance if you are unsure or uncomfortable performing any maintenance tasks on your golf cart.