How do i replace the wheels on razor dlx electric skateboard?

Replacing the wheels on a Razor DLX electric Skateboard is a fairly straightforward process. Here are the steps to follow: 1. Start by turning off your electric Skateboard and disconnecting the battery to ensure safety. 2. Use a skate tool or wrench to loosen the nuts holding the trucks in place. Remove the nuts and washers, making sure to keep them in a safe place. 3. Once the nuts and washers are removed, gently lift the Skateboard deck off the trucks. Be careful not to damage any wires or components connected to the deck. 4. Set the deck aside and flip the trucks upside down to access the wheels. Check for any signs of wear or damage on the current wheels. 5. To remove the old wheels, use a skate tool or your hands to unscrew the nuts holding them in place. Once the nuts are removed, pull the wheels straight off the axles. 6. Take your new wheels and slide them onto the axles, making sure they are aligned properly. Screw the nuts back on, tightening them securely with a skate tool. 7. Flip the trucks back over and place the Skateboard deck back on top. Make sure to align the holes in the deck with the bolts on the trucks. 8. Slide the washers onto the bolts, followed by the nuts. Use a skate tool or wrench to tighten the nuts until they are snug, but be careful not to overtighten and damage the trucks. 9. Finally, reconnect the battery and turn on your electric Skateboard to ensure that everything is working properly. Take a short test ride to make sure the new wheels are functioning as expected. Please note that if you are unsure about any step or if you encounter any issues, it is always recommended to consult the user manual or contact the manufacturer for assistance.