Diy electric skateboard how to mount voltmeter?

To mount a voltmeter on a DIY electric Skateboard, follow these steps: 1. Gather the necessary materials: You will need a voltmeter, screws or adhesive tape, a screwdriver (if applicable), and possibly a drill (if you prefer to use screws). 2. Determine the mounting location: Choose a suitable location on your electric Skateboard to mount the voltmeter. This could be on the deck, near the handle, or on the battery or controller casing. 3. Prepare the mounting surface: Clean and dry the chosen mounting location to ensure a secure installation. If necessary, use sandpaper to roughen the surface for better adhesion. 4. Mount using adhesive tape: If you prefer a non-permanent installation, use adhesive tape on the back of the voltmeter to secure it to the Skateboard. Ensure that the tape is strong enough to hold the weight of the voltmeter and withstand vibrations during riding. 5. Mount using screws: If you prefer a more secure and permanent installation, mark the desired location for the voltmeter and drill pilot holes if necessary. Then, attach the voltmeter to the Skateboard using screws and a screwdriver. 6. Connect the wires: Once the voltmeter is securely mounted, connect the wires to the appropriate terminals. Refer to the voltmeter's user manual for specific instructions on wiring. 7. Test and adjust: Double-check the mounting to ensure it is secure. Test the voltmeter by turning on your electric Skateboard and monitoring the voltage display. Adjust as needed for visibility and accessibility while riding. Remember to follow safety guidelines and consult the user manual of your specific voltmeter for any additional instructions or precautions.